MPM PS160 2017

The PS160 is the first model of our range of vehicles developed by MPM MOTORS which offers a car with expressive sports aesthetics and at a very affordable price.
Its unique design, for a production car, which combines tubular space-frame and a composite bodywork, the PS160 does not exceed 1225 kg, which gives it sporty dynamics and an attractive power to weight ratio.


Pre-Series launch offer available from 10 490ttc  

 
 

DIMENSIONS

  • Total length: 4684 mm 
  • Overall width: 1860 mm
  • Overall height: 1383 mm
  • Ground clearance: Rear:                                  315 mm / front: 223 mm
  • Wheelbase: 2750 mm
  • Fuel tank capacity: 55 liters
  • Luggage compartment: 380 liters
  • Curb Weight: 1225 kg

ENGINE

  • Traction
  • Mitsubishi, petrol
  • 4G18S 100ch 1.6L, 4 cylinders in line
  • Compression ratio: 10.0: 1
  • Weight: 197 kg.
  • 1584 cm3
  • Engine torque : 138 Nm at 3000 rmp
  • Power consumption: 7.2 L / 100 km
  • CO2 : 158 g  CO2/km 
  • Euro 6

TRANSMISSION

  • Mechanical Transmission 5-speed

BRAKES

  • Disc Brakes, Hydraulic
  • Dual circuit
  • Ø 255 mm, thickness: 26 mm
  • ABS

STANDARD EQUIPMENT

  • 18inch aluminum wheels
  • Sports bucket seats
  • Heated mirrors
  • Air conditioner
  • Anti pollen filter
  • MP3 audio system HiFi 4 speakers ALPINE Audio
  • Driver airbag
  • Radio CD MP3, LCD and USB port
  • LED Daytime Running Lights
  • Anti Fog lamps

 

  • Theft system approved THATCHAM
  • Anti intrusion, movement sensor system
  • Neiman
  • Electric front and rear windows
  • Windows with child safety
  • Isofix

FRAME

Its unique design for a production car that combines tubular frame and composite body, (Design used mainly in motorsport).
Our vehicles are 10 to 25% lighter than their counterparts in the same categories which gives it sporty dynamics and an attractive power to weight ratio.

Composite body

The composite body of the PS 160 is both a weight gain and a great way to reduce the prices of spare parts.

WARRANTY 2 YEARS / 60,000 KM

(1st of the two terms due)

 

    

 

IMPROVEMENTS

The PS160 will evolve and be constantly improved by our teams of engineers and designers.
These improvements can be made for a very reasonable cost on the vehicle at the request of PS160 owners purchased in pre-production *.


 

Pre-Series

What is Pre-Series ?

It is the manufacturing of an industrial product in limited quantities, providing the possibility of conducting final adjustments on the product or it's manufacturing method before the debut of the mass production.

The pre-series product may contain light defects in finishing, paint, body panel fittings or interior components' finishing.

Any defects of this type that may have gone unnoticed by quality checks will be corrected (fixed/replaced) free of charge at the production factory of the vehicle.

The PS160 is fully assembled near Paris.



 

 

 

Security

From its initial conception the steel space frame with composite body of the PS160 is exceptional at absorbing impacts.

The engine shows very little movement during the impact and the steering column doesn't protrude into the passenger cabin.
The doors show almost no deformation after impact, hence making it easy for the occupants to exit the vehicle after impact.

The test was a success from its first attempt which re-insures the success of our future projects.

 

 
Successful test of the first shot / Test performed to UNECE R94 regulation under supervision of UTAC CERAM laboratory FRANCE

 

 



 

 

Since MPM Motors vehicles are marketed in the EU, their prices and finitions may vary from one country to another. For detailed information on available serial or optional equipment, please refer to www.mpm-motors.com. Every effort has been made to ensure that the contents of this publication are accurate and update.
As part of its policy of continuous product improvement, MPM Motors reserves the right at any time to make changes to the specifcations and the vehicles and accessories described and represented. These modifcations are notifed to the MPM Motors dealers as soon as possible. Depending on the country of sale, the versions may differ. Some equipment may not be available (standard, optional or accessory). Please consult your local dealer o
r our sales department via contact@mpm-motors.com for the latest information. Because of the limitations of screens technology, the colors shown in this document may differ slightly from the actual colors of the paint or interior trim materials. All rights reserved. Reproduction in any form or by any means of the whole or part of this publication is prohibited without the prior written authorization of MPM Motors.